The M.O.A.R. Dive Reel

The 300

The 300 Reel

Based off of the MOAR but narrower for situations where 300 ft of line is ample for deeper dives and longer line deployments.

Up-Line Capable with a dedicated snap ring hole.  Line bolt snap optional.

Proprietary short ratchet mechanism design permits winding only in one direction when engaged. To disengage, simply depress the spring loaded thumb lever and the spool will spin freely resulting in efficient single hand release.  The thumb lever remains out of the way when not in use while holding and winding the reel, but is ergonomically available for activation.

Available in Right and Left Hand Model configuration

User Adjustable line guide.  You can choose between three different angles that your line will feed to suit your dive and preferences with a simple two screw fastener system.  Line guide design forces the line to distribute the line evenly preventing the dreaded line jump.

PE no-tangle spool spacer with washout scuppers.

SMB mount with bungee on the backside of the chassis. When used, it creates a tidy package that allows for quick deployment of your safety marker. (NO SMB INCLUDED, photo provided to show how it is used.)

300 feet of white #36 braided nylon line. 

4 - 1/2" spool diameter.  3 lbs total.

Stainless Steel chassis, spool, and hardware.

Stainless spool shaft and plastic bearing sleeve with built in resistance allowing for smooth operation, but will not 'fast' unspool/backlash

"D" shaped hand pocket for better retention.

Large Winding Knob to facilitate reeling long line deployments

Stainless Steel swivel bolt snap to connect to your bcd.

Made in the USA!

Ltd Lifetime Warranty with lost equipment protection





2019-2024 © Copyright. All rights reserved. 

We need your consent to load the translations

We use a third-party service to translate the website content that may collect data about your activity. Please review the details in the privacy policy and accept the service to view the translations.